27 April 2024

Gate repair

The gate to my garden had felt a bit wobbly for a while. I had been eying up the hinges, but I saw nothing out of the ordinary there. Then one day I noticed the problem. Its post was coming out of the wall! It had been fixed with sizeable screws and plugs, but that was clearly not enough. Screws and plugs were just coming out of the wall. I needed to act. From the moment I knew that, I wasn't really comfortable using the gate.

Gate coming out of the wall 

I first removed the gate from the post. The screws that held the two bits of wood together were in good condition, and I could just unscrew them. No such luck with the screws that were coming out of the wall, so I just pulled them clean out. No way I was going to be able to get them out of the wood with those damaged heads and rusty bodies.

After some thinking I decided that the best course of action would be to take a different piece of wood, fill the holes in the wall, put the plugs back in, and then screw the new post in. That would sort it out. And I just picked a suitable piece of wood from my pile of uncut firewood.

Preparing the new beam, in my newish garage setup


Then things got busy for a few weeks. And the weather was generally awful. You don't want to handle a gate when the wind is tugging at you! And it seemed that it was always windy and rainy. One thing I did manage to get done was indicate on the new post where the screws for into the wall should go. And I pre-drilled holes. That was garage work so not so weather-dependent. And in the weekend after the dissertation talks I finally got around to installing the whole shebang. It needed a little bit of tweaking as not everything lined up, but it got done! I have a gate again! I could do with a few days off to do more such chores, but at least this one is out of the way now…

Repaired! 



No comments:

Post a Comment